Home > Products >

Silent Call Legacy Fire Alarm Transmitter Voltage Input/No Battery
Silent Call Fire Alarm Transmitter Voltage imput/no battery

Our Price: $81.99

Availability:: Currently Unavailable
Product Code: SC-FTR

This fire alarm transmitter is wired into a home or building's fire alarm system so that when the fire alarm system is activated, the transmitter will signal any Silent Call Legacy Series receiver. When the transmitter is activated, it sends a coded wireless signal to all Silent Call Legacy Series Receivers.

You may use as many receivers as necessary with one Fire Alarm Transmitter so long as the receivers are not right next to each other. Transmittal has been tested at a range of up to 100 feet. Certain elements, such as metal objects, can interfere and shorten the range.

Fire Alarm Transmitter Installation

This transmitter should be installed by a licensed electrician. The two wires extending from the transmitter must be attached to a 12-24 volts power supply, which in turn is hooked into the fire alarm system.

It is recommended that the transmitter be installed within a 75 foot radius of the receiver. This distance can be more or less depending upon the environment, ie: metal; wire panels, fire doors etc. that could cause a reduction in the transmittal distance. Do not install the transmitter on or in a metal fire panel. Dipswitches on the back of the unit can be changed if there are multiple systems used in the same area to avoid interference with each other.

Share your knowledge of this product. Be the first to write a review »

Browse for more products in the same category as this item:

Products > Home Safety Alerting Devices > Silent Call LEGACY Series
Products > Home Safety Alerting Devices